with Plates from a natural stone revet separate sites of a facade - a socle, an input in a building, etc.
Prior to the beginning of work of a surface of the walls which are subject to facing, check a plumb, cut down roughnesses. On the back party of facing plates carry out a notch providing the best coupling with rastgorom. On the top side of a plate and face, drill nests and cut down furrows for installation of anchors with which plates attach to a wall (fig. 104).
a Fig. 104. A laying of walls with simultaneous facing by plates :
And - from a natural stone, - silicate or ceramic;
1 - an anchor, 2 - piron, 3 - a brick, 4 - prislonnye facing plates, 5 - an applied number of plates
Facing of walls conduct in a following order: the first row of plates establish on prichalke dry. Between a wall and the established plates place wooden wedges, verifying each plate on level and a plumb. In a wall bore through nests for zadelki in them of anchors. Each facing plate fix three anchors. A backlash between a wall and the fixed number of facing fill with a solution, leaving the bosom not filled with a solution depth to 1см below the top edge. In the same order establish the following number of plates.
Plates from decorative concrete (fig. 105, having loops on the back party, are revetted with stone walls after their deposits. In the beginning establish angular and majachnye plates, then on prichalke - private soldiers. Verified on a plumb and plate level fix wire skrutkami. Their ends connect loops of plates to the hooks hammered in seams of a laying or in nests drilled in it. A bosom between a wall and the fixed plates fill with a cement mortal.
with Prislonnoj a ceramic tile with rifleniem on the back party revet walls (fig. 105, after end laying deposits. At first establish angular and majachnye tiles, then on prichalke - the basic tiles of a number. Facing conduct porjadno. Quality of facing numbers supervise prichalkoj, a plumb and level.
a Fig. 105. Facing of the laid out walls :
And - plates from decorative concrete, - the sent ceramic plates in the size 250 x 140 mm;
1 - facing plates, 2 - plate loops, 3 - the hook which has been closed up in a wall, 4 - a solution, 5 - skrutki, 6 - a laying