A brick Arriving on building accept in lots. Thus spend external examination of a brick (stones) and check passports in which the kind and mark of a brick and other data provided by operating standards or specifications are specified.

The brick of any kinds should not have beaten off corners, curvatures and other defects which are not supposed by specifications, and the obverse brick, besides, should have an equal pure surface. The silicate brick should be homogeneous colour, without cracks and inclusions of clods of mineral raw materials. The ceramic brick "эхфюцюу" is not supposed to acceptance; and also a brick having limy inclusions (dutiki), causing brick destruction.

The Brick store by kinds and marks, and an obverse brick - also on colour of an obverse surface. If a brick deliver to a building site without containers or packages it unload manually, stack in stacks in height to 1,6м or on pallets. Thus a brick with not through emptiness have emptiness downwards so that water which increases humidity of walls did not get into them and at freezing can cause brick destruction. An obverse brick stack in stacks correct numbers on grades, colours and shades. The stack height should not exceed 1,5м. Packages with a brick establish at object in a warehouse stacks, in one-two circle.

Ceramic stenovye and facing stones, and also stones from other materials unload, store and store the same as an obverse brick. Facing products from ceramic, concrete and other plates store in containers or stacks on wooden linings, they are laid in 2... 3 numbers on an edge an obverse surface to each other. Front tiles of the small size store in containers, and facing architectural details - stack on linings, in one number on height.

all articles from section " Brick ъырфър"

System of bandaging of a laying

Bricklaying Process

Transportation, warehousing, giving and a brick apportion on a wall

Giving, rasstilanie and solution levelling

Ways and sequence of a laying. Kinds rasshivki seams

the Laying of walls and corners

The Laying of columns and piers

the Reinforced bricklaying

The Laying of crosspieces, wells

The Device of deformation seams

The Workplace of masons

The Organization of work of masons

the Stage-by-stage control and requirements to quality of a laying. The general requirements

Features of erection of stone designs in seismodangerous zones

Rules of technical safety